MagTek IntelliStripe 320 99875167 - Manual (Page 21)

Section 2. Installation
13
For “C” bezel configuration, the dimensions in Figure 6 are for the unit mounted from the back
side of the panel. These dimensions include the dimensions from the centerline of the card slot
to other areas for mounting the unit from the backside of the panel. Note the dimension from the
bottom of the panel opening to the centerline.
Figure 6. Panel Opening for Mounting “C” Bezel
It is not necessary to remove the Bezels when mounting the unit. The “C” Bezel protrudes from
the opening, and the “A” Bezel is positioned against the inside of the panel opening. The bracket
should retain the unit so the “A” Bezel is held firmly against the inside of the panel.