MagTek IntelliStripe 320 99875167 - Manual (Page 30)

IntelliStripe 320 Motorized Reader
22
Power Supply
The Power Supply, P/N 64300080, 100V
−240V regulated, 12VDC @ 1.5 Amps, with special 2.5
mm plug is shown in Figure 17. If the Contactless Smart Card option is implemented, the DC
supply must be increased to about 2.5 Amps (P/N 64300104). The AC power cord, P/N
71100001, is for use in North America. Other users must supply their own cord (requires an
IEC-320-C13 connector at the power supply).
Figure 17. Power Supply
Power-Fail Capacitor Connector, 2-Pin
The Power-Fail Capacitor connector, J7, connects to an optional external capacitor that is used to
eject the card during a power failure. Pin 1 connects to the positive side of the capacitor and pin
2 connects to the negative side.