Section 2. installation, Requirements, Figure 2-1. micrimage with msr – MagTek MICRImage CHECK READER User Manual
Page 13
Advertising
![background image](/manuals/413782/13/background.png)
5
SECTION 2. INSTALLATION
The installation for the MICRImage Check Reader is described below. Figure 2-1 shows the
unit with the MSR.
LED
Check Path
Card Path
Easy-Access
Latch
Figure 2-1. MICRImage with MSR
REQUIREMENTS
The following is required for the Installation:
•
MICRImage
•
Interface Cable,
•
Power Adapter 12 VDC, 1.5 Amp
Advertising