Appendix c. check reading, E13-b character set, Cmc-7 character set – MagTek MICRImage CHECK READER User Manual
Page 35
27
APPENDIX C. CHECK READING
The characters printed on the bottom line of commercial and personal checks are special. They
are printed with magnetic ink to meet specific standards . These characters can be read by a
MICRImage Reader at higher speeds and with more accuracy than manual data entry. Two
MICR character sets are used world wide; they are: E13-B and CMC-7. The E13-B set is used
in the US, Canada, Australia, United Kingdom, Japan, India, Mexico, Venezuela, Colombia, and
the Far East. The CMC-7 set is used in France, Spain, other Mediterranean countries, and most
South American countries.
E13-B CHARACTER SET
The MICR font character set E13-B includes digits 0 through 9 and four symbols. The numbers
found on U.S. checks are of the E13-B character set. The numbers and symbols of E13-B are as
follows:
Transit symbol
Dash Symbol
On-Us Symbol
Amount Symbol
CMC-7 CHARACTER SET
The numbers and symbols of the CMC-7 character set are as follows:
SI SII SIII SIV S5