MagTek MICRImage CHECK READER - Manual (Page 20)

MICRImage Check Reader
12
Easy-Access Latch
Pull Latch Up Then Back
Figure 3-3. Opening the Unit
Cleaning Check Path and Imager
1.
When the unit is open, as shown in Figure 3-4, check the path for debris. To clean, turn
the unit over and tap gently on the bottom.
Imager
Easy-Access
Latch
Alignment
Pin
Alignment
Hole
Figure 3-4. Cleaning Check Path and Imager
2.
Check the Imager to ensure there is no build-up of ink or paper debris.