Wagner ProCoat - Manual (Page 14)

English 14
Safety Spraying
troubleshooting -
clean the
Inlet Filter
You will need:
• Warm, soapy water for latex material
• Mineral spirits for oil based materials
IMPoRtAnt: Make sure your floors and
furnishings are covered with drop cloths to
prevent accidental drips.
1. Unscrew the inlet filter from the fitting on the end of the
suction tube.
3. Replace the cleaned filter by threading it back into the
fitting on the end of the suction tube.
2. Clean the filter using the appropriate cleaning solution
(warm, soapy water for latex materials, mineral spirits
for oil-based materials).
1
3
2