Wagner ProCoat - Manual (Page 15)

15 English
Safety Short term
Storage
this procedure should be used when
taking a short term break or when ending
your project for the day. If your break
is longer than 16 hours follow cleanup
instructions, page 16.
You will need:
• Water
• Plastic bag or bucket
• Rags
• Stir stick
Instructions are for latex
materials only
note: If using oil based material follow
instructions for cleanup on page 16.
Shutdown
Startup
1. Peform the Pressure Relief
Procedure, page 7.
1. Remove the spray gun from the
plastic bag or the water.
2. Place spray gun in plastic bag or
immerse into bucket of water.
2. If water was added during shut
down, stir water into material with
the stir stick.
3. Pour 1/2 cup water slowly on the
top of the paint to prevent the
paint from drying. Place the entire
spraying system out of the sun.
3. Follow Getting Material to Flow
instructions, page 9.
PRIME
1
1
2
2
3
3
OR
Page 9