Wagner ProCoat - Manual (Page 7)

7 English
Pressure Relief
Procedure*
*Perform when instructed
Be sure to follow the Pressure
Relief Procedure when shutting the
unit off for any purpose. this
procedure is used to relieve
pressure from the spray hose.
Failure to do so could result in
serious injury.
You will need:
• A waste bucket
Important Safety Warning
Be careful when handling the spray gun so you don’t
accidently spray yourself. the high pressure paint
stream could pierce your skin causing serious injury. If
an accident happens see detail procedures in the Safety
Information section on pages 2-3. See physician
immediately and bring this instruction manual.
1. Lock the spray gun trigger.
3. Turn the PRIME/SPRAY knob to PRIME.
2. Turn the power OFF.
4. Unlock the spray gun. Briefly pull the trigger to fully
relieve pressure from the system. Lock the spray gun.
1
PRIME
3
l
O
2
4
OFF