Wagner ProCoat - Manual (Page 19)

19 English
cleaning the
Spray Gun
components
You will need:
• Soft bristled brush
• Light household oil
• Warm, soapy water if using latex material
• Mineral spirits for oil based material
• Wrench 1. Peform the Pressure Relief
Procedure, page 7.
4. Pour a few drops of light
household oil inside gun housing.
5. Install gun filter tapered-end first.
Reassemble spray gun.
6. Install spray tip with arrow pointing
towards front of spray guard tip.
7. Install spray tip and guard
assembly.
2. Pull trigger guard to separate
from filter housing and
unscrew housing using a
wrench
3. Remove filter from spray gun. Clean
spray tip and filter with soft bristled
brush and appropriate cleaning
solution
PRIME
1
4 5 6 7
2 3
HOUSEHOLD
OIL