Important safety information 2, Important electrical information, Grounding instructions – Wagner ProCoat User Manual

Page 3: English

Advertising
background image

3

English

HAZARD: GeneRAL

Can cause severe injury or property damage.

PReVentIon:

• Read all instructions and safety precautions before

operating equipment.

• Follow all appropriate local, state, and national

codes governing ventilation, fire prevention, and

operation.

• The United States Government Safety Standards

have been adopted under the Occupational

Safety and Health Act (OSHA). These standards,

particularly part 1910 of the General Standards and

part 1926 of the Construction Standards should be

consulted.

• Use only manufacturer authorized parts. User

assumes all risks and liabilities when using parts

that do not meet the minimum specifications and

safety requirements of the pump manufacturer.

• Before each use, check all hoses for cuts, leaks,

abrasion or bulging of cover. Check for damage or

movement of couplings. Immediately replace the

hose if any of these conditions exist. Never repair a

paint hose. Replace it with another grounded high-

pressure hose.

• All hoses and fittings must be secured before

operating spray pump. Unsecured parts can eject

at great force or leak a high pressure fluid stream

causing severe injury.

• All hoses, swivels, guns, and accessories must be

pressure rated at or above 2800 PSI/193 BAR.

• Do not spray outdoors on windy days.

• Wear clothing to keep paint off skin and hair.

• Do not operate or spray near children. Keep

children away from the equipment at all times.

• Do not overreach or stand on an unstable support.

Keep effective footing and balance at all times.

• Stay alert and watch what you are doing.

• Do not operate the unit when fatigued or under the

influence of drugs or alcohol.

Important Electrical Information

IMPoRtAnt: Use only a 3-wire extension cord that

has a 3-blade grounding plug and a 3-slot receptacle

that will accept the plug on the product. Make sure

your extension cord is in good condition. When

using an extension cord, be sure to use one heavy

enough to carry the current your product will draw.

An undersized cord will cause a drop in line voltage

resulting in loss of power and overheating. A 14

or 12 gauge cord is recommended (see chart). If

an extension cord is to be used outdoors, it must

be marked with the suffix W-A after the cord type

designation. For example, a designation of SJTW-A

would indicate that the cord would be appropriate

for outdoor use.
Wagner Spray Tech accessory extension cords

recommended:

P/N 0090241 - 20 foot extension cord.

P/N 0090242 - 35 foot extension cord.

Cord gauge

Maximum cord length

12

150 feet

14

100 feet

Do not use more than 50 feet of spray hose. If you

need to spray further than 50 feet from your power

source, use more extension cord, not more spray

hose.

Grounding Instructions

This product must be grounded. In the event of an

electrical short circuit, grounding reduces the risk of

electric shock by providing an escape wire for the

electric current. This product is equipped with a cord

having a grounding wire with an appropriate grounding

plug. The plug must be plugged into an outlet that is

properly installed and grounded in accordance with all

local codes and ordinances.

WArNINg - Improper installation of the

grounding plug can result in a risk of electric

shock.
If repair or replacement of the cord or plug is necessary,

do not connect the green grounding wire to either

flat blade terminal. The wire with insulation having a

green outer surface with or without yellow stripes is the

grounding wire and must be connected to the grounding

pin.

Check with a qualified electrician or serviceman if the

grounding instructions are not completely understood, or

if you are in doubt as to whether the product is properly

grounded. Do not modify the plug provided. If the plug

will not fit the outlet, have the proper outlet installed by a

qualified electrician.

This product is for use on a nominal 120 volt circuit and

has a grounding plug that looks like the plug illustrated

below. Make sure that the product is connected to an

outlet having the same configuration as the plug. No

adapter should be used with this product.

Grounded Outlet

Grounding Pin

Cover for grounded outlet box

If you experience problems with your sprayer at

any time during assembly, operation, or cleanup,

please refer to the troubleshooting section of this

manual (page 22), or call customer service at:

1-800-328-8251

Advertising