Campbell Scientific CR800 and CR850 Measurement and Control Systems - Manual (Page 428)

Section 11. Glossary
428
connector. The plug at the end of a lamp power cord is the male
portion of the connector. See terminal
(p. 445).
constant
A packet of CR800 memory given an alpha‐numeric name and assigned
a fixed number.
control I/O
Terminals C1 ‐ C4 or processes utilizing these terminals.
CoraScript
CoraScript is a command‐line interpreter associated with LoggerNet
datalogger support software. Refer to the LoggerNet manual, available
at www.campbellsci.com, for more information.
CPU
Central processing unit. The brains of the CR800.
CR1000KD
An optional hand‐held keyboard display for use with the CR1000 and
CR800 dataloggers. See the appendix Keyboard Display
(p. 545).
CR10X
Older generation Campbell Scientific datalogger replaced by the CR800.
cr
Carriage return
CRBasic Editor Compile, Save and Send
CRBasic Editor menu command that compiles, saves, and sends the
program to the datalogger.
CS I/O
Campbell Scientific Input / Output. A proprietary serial communications
protocol.
CVI
Communications verification interval. The interval at which a PakBus®
device verifies the accessibility of neighbors in its neighbor list. If a