Campbell Scientific CR800 and CR850 Measurement and Control Systems - Manual (Page 467)

Appendix A. CRBasic Programming Instructions
467
Therm107
Measures a Campbell Scientific 107 thermistor.
Syntax
Therm107(Dest, Reps, SEChan, Vx/ExChan, SettlingTime, Integ,
Mult, Offset)
Therm108
Measures a Campbell Scientific 108 thermistor.
Syntax
Therm108(Dest, Reps, SEChan, Vx/ExChan, SettlingTime, Integ,
Mult, Offset)
Therm109
Measures a Campbell Scientific 109 thermistor.
Syntax
Therm109(Dest, Reps, SEChan, Vx/ExChan, SettlingTime, Integ,
Mult, Offset)
A.5.9.1 Wireless Sensor Network
ArrayIndex
Returns the index of a named element in an array.
Syntax
ArrayIndex(Name)
CWB100
Sets up the CR800 to request and accept measurements from the CWB100
wireless sensor base.
Syntax
CWB100(ComPort, CWSDest, CWSConfig)
CWB100Diagnostics
Sets up the CR800 to request and accept measurements from the CWB100
wireless sensor base.
Syntax
CWB100(ComPort, CWSDest, CWSConfig)
CWB100Routes
Returns diagnostic information from a wireless network.
Syntax
CWB100Diagnostics(CWBPort, CWSDiag)
CWB100RSSI
Polls wireless sensors in a wireless‐sensor network for radio signal strength.
Syntax
CWB100RSSI(CWBPort)