Campbell Scientific CR800 and CR850 Measurement and Control Systems - Manual (Page 503)

Appendix A. CRBasic Programming Instructions
503
OmniSatSTSetup
Sets up the OMNISAT transmitter to send data over the GOES or METEOSAT
satellite at a self‐timed transmission rate.
Syntax
OmniSatSTSetup(ResultCodeST, ResultCodeTX, OmniPlatformID,
OmniMsgWindow, OmniChannel, OmniBaud, STInterval,
STOffset)
A.20.4 INMARSAT-C
INSATData
Sends a table of data to the OMNISAT‐I transmitter for transmission via the
INSAT‐1 satellite.
Syntax
INSATData(ResultCode, TableName, TX_Window, TX_Channel)
INSATSetup
Configures the OMNISAT‐I transmitter for sending data over the INSAT‐1
satellite.
Syntax
INSATSetup(ResultCode, PlatformID, RFPower)
INSATStatus
Queries the transmitter for status information.
Syntax
INSATStatus(ResultCode)
A.21 User Defined Functions
Function / EndFunction
Creates a user‐defined function.
Syntax
Function [optional parameters] As [optional data type]
Return [optional expression]
ExitFunction [optional]
EndFunction