Campbell Scientific RDP500 Remote Data Platform User Manual
Page 11
Advertising
RDP500 Remote Data Platform
Gap
Gap
FIGURE 3.2-1. A gap of ~1/8” left under the bolt heads allows
enclosure bracket to slide under bolt head.
3. Install the enclosure assembly onto the base.
4. Align the two keyholes in the bottom of the enclosure bracket over the two
bolts; then slide the enclosure to the right until the keyhole slots bottom
against the bolts (Figure 3.2.-2).
FIGURE 3.2-2. Keyholes aligned over bolts.
7
Advertising