Campbell Scientific RDP500 Remote Data Platform User Manual
Page 16
Advertising
RDP500 Remote Data Platform
2. Feed the solar panel cable and grounding wire through the plastic
compression fitting and brass hex bushing into the base of the rain gauge
(Figure 3.3-1).
FIGURE 3.3-1. Solar panel cable and grounding wire routed through
compression fitting of rain gauge base.
3. Route the solar panel cable through the compression fitting attached to the
internal enclosure and up into the PS100 charging source (Figure 3.3-2).
Grounding Wire
Load Cell Cable
Solar Panel Cable
FIGURE 3.3-2. Solar panel cable routed through compression fitting of
internal enclosure.
12
Advertising