Campbell Scientific RDP500 Remote Data Platform User Manual
Page 14
Advertising
RDP500 Remote Data Platform
Flat Blade Screwdriver
FIGURE 3.2-5. Flat blade screwdriver turns the gain adjusting screw.
9. Lift the front member of the parallelogram carefully and route the lower
hook through the eyebolt and slowly lower the front-end parallelogram.
10. Use the upper hook adjusting nut to shorten the distance between the two
hooks so that the weight of the moving end of the parallelogram is
supported by the load cell (Figure 3.2-6).
FIGURE 3.2-6. Side view showing cable and arms horizontal
and overload protection screw.
10
Advertising