Campbell Scientific RDP500 Remote Data Platform - Manual (Page 12)

RDP500 Remote Data Platform
5. Using the small 7/16” wrench provided, tighten the two bolts to firmly
attach the enclosure to the base. The two bolts are easily accessed through
the slots on either side of the enclosure bracket (Figure 3.2-3 and 3.2-4).
Slight variability may exist among Fischer/Porter and Belfort
rain gauge bases. If the internal enclosure cannot be mounted so
that the rain gauge’s outer housing will not slide on, please
contact Campbell Scientific, Inc. NOTE
Thin Head Wrench
FIGURE 3.2-3. Tightening bolts to attach enclosure to the base.
8