Arizona MAX-5000XL - Manual (Page 53)

AZI Customer Service 800-528-7411 or 602-470-1414 Page 53 of 92
Data Format Setup
This menu brings up the two categories
of data, one display oriented and the
other report oriented.
EC Display
This selection controls the displaying of the word RELIABILITY on the Main Test
Screen for PREDICT ENDING CRITERIA. Displaying this value is useful during
parameter development to aid in selecting the best ending criteria. It may also help
the operator to determine the remaining test time if the ending criteria target is known.
Lot Number
If the LOT NUMBER function is ON,
starting a material test brings up a
screen labeled ENTER LOT NUMBER
AND PRODUCT ID. These
alphanumeric entries may be used to
insert the lot designation and unique
product identification into reports. Not
all industries or processes will use
them so they may be enabled only
when needed.
LOT NUMBER: – Alphanumeric code
to identify the product lot number.
PRODUCT ID: - Alphanumeric code
used by some companies to identify specific products.