Arizona MAX-5000XL - Manual (Page 80)

AZI Customer Service 800-528-7411 or 602-470-1414 Page 80 of 92
10.4. Oven Chamber Cleaning
This selection is the start of an oven cleaning process that burns off most residue build up
in the oven. Similar to the self-cleaning mode in a home oven, the process turns the
heating elements on to reach an oven temperature of 550º C in less than 22 minutes. The
oven cleaning cycle lasts a total of 45 minutes. The heat generated makes the top of
the instrument hotter than normal and extreme caution should be used to prevent
injury until the instrument has cooled down after the cleaning cycle.

From the MAIN MENU, select
CALIBRATION MENU and
OVEN SELF CLEANING.

Press [ENT]. The screen display
will provide instructions as
illustrated.

When the pan support has been
gently removed (see page 82),
close the lid and press [GO].

The temperature and time left in
the cleaning process will
displayed

At the conclusion of the cleaning
cycle, the screen will display
“OVEN SELF CLEANING IS DONE.”
Press [OK] or [ESC] to return to
MAIN MENU.
Cleaning frequency will vary depending on the application and frequency of use. We
recommend that you establish a periodic cleaning schedule to ensure unit-to-unit
correlation and performance. Call AZI Customer Service at 800-528-7411 or
602-470-1414 if you have any questions.