Read codes, Read codes -2 – Actron Professional Enhanced Scan Tool 9640A User Manual

Page 34

Advertising
background image

Global OBD II Diagnostics

4 – 2 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

4 4

Select I/M Readiness from the

OBDII

Function List

menu and press

ENTER

.

The scan tool displays a message stat-
ing whether the I/M Readiness monitors
are completed.

Use the

DOWN

arrow key to view the monitor statuses. If both monitor types are

supported, then use the

LEFT/RIGHT

arrow keys to toggle between monitor

types.

• A status of “OK” means that the required driving conditions for that monitor

have been met and the monitor passed.

• A status of “Inc” means that the required driving conditions for that monitor

have not been met or the monitor did not pass.

• A status of “N/A” means the vehicle does not support that monitor.

When done, press the

BACK

key to return to the

OBDII Function List

.

READ CODES

The Read Codes function retrieves Diagnostic Trouble Codes (DTCs) from the
vehicle’s computer module(s). This function can be performed with the KOEO
or KOER.

These codes cause the computer to illuminate the Malfunction Indicator Lamp
(MIL) when an emission-related or driveability fault occurs. The MIL is also
known as the “service engine soon” or “check engine” lamp.

Select Read Codes and press

ENTER

.

The Scan Tool retrieves the DTCs
stored in the vehicle’s computer mod-
ule(s).

The Scan Tool displays the DTCs or a message stating SYSTEM PASS: NO
CODES FOUND. Scroll down to view the DTCs or press the

BACK

key to return

to the

OBDII Function List.

OBDII Function List |

` 1)I/M Readiness

2)Read Codes

[

3)Pending Codes

~

Not All Supported

On-Board Readiness

Tests Are Complete.

Use [ To View

~

On-Board Readiness |

Tests Are Complete

Use [ To View Test~

THIS DRIVING CYCLE

Misfire Monitor

n/a

Fuel System Mon ok [

Catalyst Mon

inc ~

SINCE DTCS CLEARED

Misfire Monitor

ok

Fuel System Mon ok [

Catalyst Mon

inc~

OBDII Function List |

1)I/M Readiness

` 2)Read Codes

[

3)Pending Codes

~

System Pass:

No Faults Detected.

~

DTCs Found: 1

Use [ To View DTCs

Write Down Codes

For Reference ~

Advertising
This manual is related to the following products: