Actron Professional Enhanced Scan Tool 9640A - Manual (Page 97)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 7 – 9
Chrysler Diagnostics
7
One sensor will be displayed per
screen. Use the
UP/DOWN arrow keys
to scroll through the supported sensors.
The tool displays the status of the sen-
sor.
Press the
BACK
or
FUNC
key to end the test and return to the Chrysler Func-
tions list.
CONTROLLER INFO
Controller Information provides additional specifications on the PCM and
vehicle under test, such as:
• Internal PCM ID number
• Emission Type (Federal, California, Canadian, etc.)
• Fuel type
• Model year of car (controller)
• Turbo or non-turbo engine
• Engine Controller type
• Engine size
• Car or truck application
• Transmission type
• Drivetrain layout (front or rear drive)
✓
Controller Information varies from vehicle to vehicle.
Select Controller Info from the
Chrysler Functions list and press
ENTER
.
Turn ignition key On-Engine can be Off
or Running. Press
ENTER and the
scan tool will build the Controller Info
list.
After retrieving the Controller Infor-
mation , the tool displays the informa-
tion. Scroll through the list using the
UP/DOWN arrow keys.
Press the BACK or FUNC key to end the test and return to the Chrysler Func-
tions list.
RESET EMR LAMP
✓
(Trucks and Vans Only)
The Reset EMR Lamp function should be performed after servicing the vehi-
cle’s emissions control systems. Some Chrysler vehicles are equipped with an
Emission Maintenance Reminder (EMR) lamp. The EMR is illuminated after the
vehicle is driven a pre-programmed number of miles. The tool can do this by
resetting the EMR codes inside the vehicle PCM.
Viewing Sensor:
ADPT FUEL(%) 5.00[
~
Chrysler Functions |
9)Sensor Test ]
` 10)Controller Info [
11)Reset EMR Lamp ~
Controller Info:
1995
3.5L [
ID# 135278289309847 ~