Non-continuous tests, On-board systems, Non-continuous tests -7 on-board systems -7 – Actron Professional Enhanced Scan Tool 9640A User Manual
Page 39: 4non-continuous tests
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 7
Global OBD II Diagnostics
4
NON-CONTINUOUS TESTS
The
Non-Contin (Non-Continuous) Tests
obtains test results for emis-
sion-related powertrain components and systems that are not continuously
monitored. The
Non-Contin Test
function is useful after servicing or after eras-
ing the vehicle’s memory. Test results do not necessarily indicate a faulty com-
ponent or system.
The scan tool asks the vehicle for any available non-continuous test IDs, and
then displays them in a list. The vehicle manufacturer is responsible for assign-
ing the test and component IDs.
Select
Non-Contin Tests
from the
OBDII Function List and press
ENTER
.
A list of tests applicable to the vehicle
are displayed. Select a test and press
ENTER
.
The scan tool displays the test ID, sys-
tem or component (ID), test measure-
ment (MEAS), specification value
(SPEC) and status (STS).
✓
Refer to the appropriate vehicle service manual for test IDs and definitions.
Test results requested by the scan tool may also include test limits. Only one
test limit is included in the response message and displayed on the screen. The
test limit could be either a minimum or a maximum test limit.
The Test Measurement and Specification values are hexadecimal numbers
(i.e., $1A, $FE, $11). The status is calculated by the scan tool using the mea-
surement and specification data. Status is either LOW, HIGH, or OK.
Press the
BACK
key to return to the Non-Cont Tests Avail menu or press the
ENTER
key to return to the OBDII Function List.
ON-BOARD SYSTEMS
This test allows the scan tool to control the operation of vehicle components,
tests or systems. Some manufacturers do not allow tools to control vehicle sys-
tems. A vehicle not supporting an on-board system is identified by a message
displayed when selected.
✓
Refer to the appropriate vehicle service manual for on-board systems
instructions.
OBDII Function List
|
7)O2 Monitor Test
]
` 8)Non-Contin Tests [
9)On-Board Systems ~
Non-Cont Tests Avail
` $01
$05
[
$10
~
TEST $01
ID MEAS SPEC
STS
74 8861 C000min
Low [
76 3876 FFFFmax
OK~