Pending codes, Erase codes, Pending codes -3 erase codes -3 – Actron Professional Enhanced Scan Tool 9640A User Manual

Page 35

Advertising
background image

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 3

Global OBD II Diagnostics

4

Write down the DTCs for reference and
then press

BACK

to return to the

OBD II Function List

.

PENDING CODES

Pending Codes are also referred as “continuous monitor” and “maturing
codes”. An intermittent fault causes the computer to store a code in memory.
If the fault does not occur within 40 warm-up cycles, the code clears from mem-
ory. If the fault occurs a specific number of times, the code matures into a DTC
the MIL illuminates or blinks. This function can be performed with the KOEO or
KOER.

Select Pending Codes and press the

ENTER

key.

The Scan Tool displays the Pending DTCs or a message stating SYSTEM
PASS: NO FAULT DETECTED.

Use the

DOWN

arrow key to view the

DTCs or press the

BACK

key to return

to the

OBDII Function List.

If any of

these tests indicate a fault, the DTCs
display in the same format as Read
Codes
. Use the

UP/DOWN

arrow keys

to view the pending DTC(s).

Press

BACK

to return to the

OBDII Function List

.

ERASE CODES

The Erase Codes function deletes the DTCs from the vehicle’s computer mem-
ory. It may also erase Freeze Frame, O2 Sensor Data, System Monitors, and
On-Board Monitor test results. Perform this function only after the systems have
been checked completely and DTCs have been documented. This function
should be performed with KOEO — Do not START engine.

After servicing the vehicle, delete the stored DTCs and verify no codes have
been reset. If DTCs return, the problem has not been corrected or other faults
are present.

In addition to clearing DTCs, the Erase Codes function may also erase
Freeze Frame, O2 Sensor Data, System Monitors, and On-Board Monitor
test results.

P0107 Mod$10 1/1

MAP/BARO

Circuit Low Input

[

~

OBDII Function List |

1)I/M Readiness

2)Read Codes

[

` 3)Pending Codes ~

DTCs Found: 2

Use [ To View DTCs

Write Down Codes

Reference

~

System Pass:

No Faults Detected.

~

P0115 Mod$10 1/2

Engine Coolant Temp

Circuit Malfunction [

~

Advertising
This manual is related to the following products: