Actron Professional Enhanced Scan Tool 9640A - Manual (Page 45)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 13
Global OBD II Diagnostics
4
Printing Playback Data
When printing playback data, the Start Frame and End Frame need to be
defined.
After selecting Playback and pressing
ENTER , the Start Frame screen
shows the earliest possible frame. Use
the
UP/DOWN
arrow keys to change
the frame number and then press
ENTER
.
Next, the End Frame screen displays
the latest possible frame. Use the
UP/DOWN arrow keys to change the
frame number and then press ENTER .
The Scan Tool starts transmitting to the
printer, frame-by-frame. After all the
frames have been sent, press
ENTER
to return to the Select Print Data
screen.
Press the BACK key to return to the OBDII Function List.
A printout of the recording might
look similar to the one shown at the
right.
Start Frame: -5
Use Scroll Wheel To
Change Frame Number
Press ENTER to Cont. ~
End Frame: 19
Use Scroll Wheel To
Change Frame Number
Press ENTER to Cont. ~
Sending Frame -2
To Printer
~
---(Recorded Data)---
BATTERY(V) 12.0
COOLANT(F) 80
ENGINE RPM 0
LOOP STATUS OPEN
Frame:-1 Time:-1.1
BATTERY(V) 16.0
COOLANT(F) 90
ENGINE RPM 1000
LOOP STATUS CLSD
Frame: 0 Time: 0.0
BATTERY(V) 16.0
COOLANT(F) 90
ENGINE RPM 1000