Actron Professional Enhanced Scan Tool 9640A - Manual (Page 46)

Global OBD II Diagnostics
4 – 14 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 4
CODE LOOKUP
Code Lookup is used to look up definitions of Diagnostic Trouble Codes
(DTCs) stored in the Scan Tool. The scan tool does not require power from the
vehicle to perform this function. Internal battery power can be used.
To look up DTC definitions, select Code
Lookup from the OBDII Function List.
When entering codes, all characters
must be entered. Only one character
can be changed at a time.
❒
Use LEFT/RIGHT arrow keys to scroll to the desired character.
❒
Use the UP/DOWN arrow keys to change the selected character.
Press ENTER when done.
Use the UP/DOWN arrow keys to dis-
play the previous or next DTC. The
DTCs for the code type selected (i.e., P,
B, C, or U) are listed in numerical order.
To enter another DTC number, press
the
BACK
key. Press the
BACK
key
again to return to the OBDII Function
List.
If the DTC definition does not exist for
the vehicle, then a message, NO DTC
DEFINITION FOUND, displays on the
screen.
If the DTC is manufacturer specific, the
system the DTC is assigned to dis-
plays. You need to refer to an appropri-
ate service manual for the exact
definition.
OBDII Function List |
13)Review Data ]
14)Print Data [
15)Code Lookup ~
Lookup Code: P0000
Use Arrow Keys ^
To Select Or Press
ENTER To Lookup ~
P0622
Generator F-Term. ]
Field F Control [
~
P1C95
No DTC Definition ]
Found. See [
Service Manual ~
P1605
Computer and ]
Auxiliary Outputs. [
See Service Manual ~