Samsung SC-D372-XAA - Manual (Page 23)

ENGLISH
19 19
Preparation
Connecting a Power Source
About the Operating Modes
✤ There are two types of power source that can be connected to your Camcorder.
- The AC Power Adapter: used for indoor recording.
- The Battery Pack: used for outdoor recording.
Using a Household Power Source
Connect to a household power source to use the Camcorder without having to
worry about the battery power. You can keep the Battery Pack attached; the
battery power will not be consumed.
1. Turn the [Power] switch to [OFF].
2. Connect the AC Power adapter (AA-E9 TYPE) to a wall socket.
■ The plug and wall socket type may differ according to your resident country.
3. Connect the DC cable to the DC jack of the Camcorder.
4. Set the Camcorder to each mode by holding down the tab on the [Power]
switch and turning it to the [CAMERA] or [PLAYER] mode.
✤ The operating modes are determined by the position of the [Power] and [Mode] switches.
✤ Set the Operation Mode by adjusting the [Power] and [Mode] switches before operating any functions.
✤ M.Cam Mode : Memory Camera Mode / M.Player Mode : Memory Player Mode
✤ The <M.Cam Mode> and the <M.Player Mode> are only available on SC-D375(H)/D975.
Power Switch
Mode Name
[Power] Switch
[Mode] Switch
(SC-D375(H)/
D975 only)
<Camera Mode> <M.Cam Mode> <Player Mode> <M.Player Mode>
01227A SCD371 USA~022 2/1/07 9:37 AM Page 19