Samsung SC-D372-XAA - Manual (Page 75)

ENGLISH
Connection
Recording (Copying) a TV Program or Video Tape onto a Camcorder Tape (SC-D975 only)
71 71
✤ The Recording (Copying) function works only in <Player> Mode.
➥ page 19
✤ Connect your Camcorder to a VCR or a TV using the AV jack to record a TV
program or copy a video tape onto a Camcorder tape.
✤ Set the <AV In/Out> to <In> before Recording (Copying). ➥ page 69
Recording (Copying) onto a Camcorder Tape
1. Get your TV or VCR ready.
2. Connect the Camcorder to your VCR or TV with the Audio/Video cable.
■ Connect the Audio/Video cable to the output jack on your VCR or TV
■ The yellow jack: Video
■ The white jack: Audio (L)- Mono
■ The red jack: Audio (R)
3. Insert an empty tape in your Camcorder.
To record from a VCR
4. Insert the video tape to be played in your VCR.
■ Pause at the starting point of playing.
5. Start copying by pressing the [Record Start/Stop] button on your Camcorder.
6. Press the PLAY button on your VCR to play the tape.
To record from a TV
4. Select a TV channel to be recorded.
5. Start recording by pressing the [Record Start/Stop] button on your Camcorder.
When Recording (Copying) is Complete:
Press the [
■ (Stop)] button on your Camcorder to stop recording (copying).
[ Notes ]
■ If you operate the Camcorder connected to another device, always connect the Camcorder to an AC outlet using the AC
power adapter.
■ Copy-protected video tapes such as Macrovision or unstable TV signals cannot be recorded on this camcorder.
Camcorder
Audio/Video Cable
Signal flow
VCR
or
TV
Audio/Video
Cable
SC-D371/D372 SC-D375(H)/D975
œ œ
01227A SCD371 USA~071 2/1/07 9:39 AM Page 71