Samsung SC-D372-XAA - Manual (Page 83)

ENGLISH
79 79
✤ The Protection function works only in <M.Player> mode. ➥page 19
✤ You can protect important images from accidental erasure.
If you format the Camcorder, all images including protected images will be erased.
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [CARD].
■ The last recorded image appears.
■ If there are no recorded images on the Memory Card, <No image!> is displayed.
3. Using the [œ œœ œ/√ √√ √ (REV/FWD)] buttons, search for the photo image that you want to
protect.
4. Press the [MENU] button.
■ The menu list will appear.
5. Press the [… … / † †] button to select <Memory>, then press the [OK] button.
6. Press the [… … / † †] button to select <Protect>, then press the [OK] button.
7. Press the [… … / † †] button to select <On>, then press the [OK] button.
8. To exit, press the [MENU] button.
■ The protection ( ) icon is displayed.
[ Notes ]
■ You can directly access the Protection function using the [Q.MENU]. ➥page 20
■ If the write protection tab on the Memory Card is set to LOCK, you cannot set image
protection.
Digital Still Camera Mode (SC-D375(H)/D975 only)
Protection from accidental Erasure
Move Select Exit MENU OK
√Photo
√Off
Move Select Exit MENU OK
M.Player Mode
√Memory
M.Play Select
Delete
Delete All
Protect
Print Mark
Format
Off
On
2/46
800X600
5
7
8
√
M.Player Mode
Back
M.Play Select
Delete
Delete All
Protect
Print Mark
Format
2/46
2/46
100-0002
01227A SCD371 USA~098 2/1/07 9:40 AM Page 79