Samsung SC-D372-XAA - Manual (Page 80)

ENGLISH
76 76
✤ File Number setting works only in <M.Cam> mode. ➥page 19
✤ File Numbers are given to images in the order they were recorded when they are stored on the Memory Card.
✤ File numbers may be set as follows:
- <Series> : When there are existing files, the new image will be named as the next number in the sequence.
- <Reset>: When there are no files stored on the Memory Card, the file numbering starts from 0001.
1. Set the [Power] switch to the [CAMERA].
2. Set the [Mode] switch to [CARD].
3. Press the [MENU] button.
■ The menu list will appear
4. Press the [… … / † †] button to select <Memory>, then press the [OK] button.
5. Press the [… … / † †] button to select <File No.>, then press the [OK] button.
6. Press the [… … / † †] button to select the desired option <Series> or <Reset>, then press
the [OK] button.
7. To exit, press the [MENU] button.
[ Note ]
When you set <File No.> to <Series>, each file is assigned with a different number so as to avoid duplicating file names.
It is convenient when you want to manage your files on a PC.
Digital Still Camera Mode (SC-D375(H)/D975 only)
Setting the File Number
Move Select Exit MENU OK
√Super Fine
√Series
Move Select Exit MENU OK
M.Cam Mode
√Memory
Photo Quality
File No.
Series
Reset
4
6
M.Cam Mode
Back
Photo Quality
File No.
01227A SCD371 USA~098 2/1/07 9:40 AM Page 76