Samsung SC-D372-XAA - Manual (Page 82)

ENGLISH
78 78
Digital Still Camera Mode (SC-D375(H)/D975 only)
Viewing Photo Images (JPEG)
✤ This function works only in <M.Player> mode. ➥page 19
You can play back and view photo images recorded on a Memory Card.
✤ Be sure that the <M.Play Select> is set to <Photo> in the Menu. ➥page 85
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [CARD].
■ The last recorded image appears. If there are no recorded images on the Memory Card, <No image!> is displayed.
To view a Single Image
Using the [œ œœ œ/√ √√ √ (REV/FWD)] buttons, search for the desired photo image.
■ To view the next image: press the [√ √√ √ (FWD)] button.
■ To view the previous image: press the [œ œœ œ (REV)] button.
■ Keep pressing [√ √√ √ (FWD)] or [œ œœ œ (REV)] to search for an image quickly.
To view a Slide Show
Press the [√ √ ❙❙ (S.SHOW)] button.
■ All images will be played back consecutively for 2~3 seconds each.
■ The <Slide> is displayed. The Slide Show will start from the current picture.
To stop the slide show, press the [√ √ ❙❙ (S.SHOW)] button again.
To view the Multi Display
To view six stored images on single screen, press the [
■ (MULTI)] button.
■ A selection mark [œ œœ œ/√ √√ √] appears under the image.
■ Press the [œ œœ œ/√ √√ √ (REV/FWD)] button to select an image.
To return to single playback mode, press the [ ■ (MULTI)] button again.
■ Selected picture is displayed in full screen.
[ Notes ]
■ Any large sized image taken with another camera will be displayed as a thumbnail image.
■ To display the previous six images, press and hold the [œ œœ œ (REV)] button for about 3 seconds.
■ To display the next six images, press the [√ √√ √ (FWD)] button for about 3 seconds.
■ You can access <Delete>, <Delete All>, <Protect> or <Print Mark> functions in Multi Display view mode, using the
[Q.MENU] button.
2/46 Slide
800X600
100-0002
√√
œ
√
7/25
œœ
100-0007
√
01227A SCD371 USA~098 2/1/07 9:40 AM Page 78