Samsung SC-D372-XAA - Manual (Page 73)

69 69
✤ AV In/Out function works only in <Player> mode. ➥page 19
✤ AV In/Out setting enables you to record signals from external sources and display it on
the camcorder's LCD Screen. Also, you can send your video or image to from the
camcorder to external devices.
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Press the [MENU] button.
■ The menu list will appear.
4. Press the [… … / † †] button to select <Record>, then press the [OK] button.
5. Press the [… … / † †] button to select <AV In/Out>, then press the [OK] button.
6. Press the [… … / † †] button to select <Out> or <In>, then press the [OK] button.
■ <Out>: Select this when copying or playing back the contents of this camcorder onto
the external device.
■ <In>: Select this when recording the contents of an external device to the
camcorder.
7. To exit, press the [MENU] button.
[ Notes ]
■ When recording images from a VCR, playback must be at normal speed, or a gray
image will appear on the Camcorder.
■ If <AV In/Out> is set to <In>, the WindCut Plus function is not available.
ENGLISH
Playback
Setting the AV In/Out (SC-D975 only)
√SP
√12Bit
√Off
√Out
Move Select Exit MENU OK
Player Mode
√Record
Rec Mode
Audio Mode
WindCut Plus
AV In/Out
Move Select Exit MENU OK
Player Mode
Back
Rec Mode
Audio Mode
WindCut Plus
AV In/Out
2
4
6
Out
In
01227A SCD371 USA~071 2/1/07 9:39 AM Page 69