Reviewing and searching a recording (rec search), Basic recording – Samsung SC-D372-XAA User Manual
Page 40
ENGLISH
36
36
Basic Recording
✤ The REC SEARCH function works only in <Camera> mode. ➥page 19
✤ Used to review previously recorded images or to find a point to record a new image in the STBY mode.
Record Search (REC SEARCH)
1. Set to STBY mode by pressing [Record Start/Stop] button.
2. [REC SEARCH -] enables you to play the recording backwards and [REC SEARCH +]
enables you to play it forwards, as long as you keep each button pressed down.
■
If you press the [REC SEARCH -] button in STBY mode, your Camcorder will play
in reverse for 3 seconds and return to the original position automatically.
[ Notes ]
■
Mosaic shaped distortion may appear on the screen while in Record Search mode.
■
Pressing [Record Start/Stop] button after REC SEARCH will overwrite the images
recorded after that point.
Reviewing and Searching a Recording (REC SEARCH)
When a cassette is loaded and the Camcorder is left in the STBY mode for more than 5 minutes without being used,
it will switch off automatically.
To use it again, press the [Record Start/Stop] button or set the [Power] switch to [OFF] and then back to [CAMERA].
This auto power off feature is designed to save battery power.
01227A SCD371 USA~042 2/1/07 9:38 AM Page 36