Allied Telesis AT-SBx31CFC960 - Manual (Page 100)

Chapter 5: Installing the Chassis in an Equipment Rack
100
Figure 40. Installing the Rack Mount Screws
5. Tighten all eight screws to secure the chassis to the equipment rack.
Allied Telesis recommends tightening the screws to 10 inch-lbs.
6. Go to “Removing the Shipping Brace” on page 101.
First two screws
Bottom Screw
Center Screw
Top Screw
Bottom Screw
Center Screw
Top Screw
installed