Allied Telesis AT-SBx31CFC960 - Manual (Page 148)

Chapter 8: Installing the Transceivers and Cabling the Ports
148
Figure 87. Removing the Dust Cover from the SFP Transceiver in the AT-
SBx31GS24 Line Card
Note
The dust cover protects the fiber optic port on the SFP transceiver
from dust contamination. It should not be removed until you are
ready to connect the fiber optic cable.
6. Connect the fiber optic cable to the port on the transceiver, as shown
in Figure 88 on page 149. The connector should snap into the port.