Allied Telesis AT-SBx31CFC960 - Manual (Page 149)

SwitchBlade x3112 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
149
Figure 88. Attaching a Fiber Optic Cable to an SFP Transceiver in the AT-
SBx31GS24 Line Card
7. Repeat this procedure to install additional SFP transceivers.
After installing and cabling the SFP transceivers, do one of the following:
 To install and cable additional transceivers, go to the appropriate
section in this chapter for instructions.
 After cabling all the ports in the chassis, go to Chapter 9,
“Powering On the Chassis” on page 173.