Allied Telesis AT-SBx31CFC960 - Manual (Page 165)

SwitchBlade x3112 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
165
Figure 105. Attaching a Fiber Optic Cable to an XFP Transceiver in the
AT-SBx31XZ4 Line Card
7. Repeat this procedure to install additional XFP transceivers.
After installing and cabling the XFP transceivers in the AT-SBx31XZ4 Line
Cards, do one of the following:
 To install and cable additional transceivers, go to the appropriate
section in this chapter for instructions.
 After cabling all the ports in the chassis, go to Chapter 9,
“Powering On the Chassis” on page 173.