Allied Telesis AT-SBx31CFC960 - Manual (Page 90)

Chapter 5: Installing the Chassis in an Equipment Rack
90
Required Tools and Material
You need the following tools and material to install the product in an
equipment rack:
 #2 Phillips-head screwdriver
 Eight equipment rack screws
 Flat-head screwdriver
 #2 Phillips-head 10 inch-lbs torque screwdriver (optional)
Warning
The chassis may be heavy and awkward to lift. Allied Telesis
recommends that you get assistance when mounting the chassis in
an equipment rack.
 E30