Allied Telesis AT-SBx31CFC960 User Manual
Page 158
Advertising
Chapter 8: Installing the Transceivers and Cabling the Ports
158
Figure 98. Attaching a Fiber Optic Cable to an SFP+ Transceiver in the
AT-SBx31XS6 Line Card
6. Repeat this procedure to install additional SFP plus transceivers in the
AT-SBx31XS6 Line Cards.
After installing and cabling the SFP+ transceivers, do one of the following:
To install and cable additional transceivers, go to the appropriate
section in this chapter for instructions.
After cabling all the ports in the chassis, go to Chapter 9,
“Powering On the Chassis” on page 173.
Advertising
This manual is related to the following products: