Allied Telesis AT-SBx31CFC960 - Manual (Page 171)

SwitchBlade x3112 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
171
Figure 110. Attaching a Fiber Optic Cable to an SFP or SFP+ Transceiver
in the AT-SBx31CFC960 Controller Fabric Card
6. Repeat this procedure to install additional SFP or SFP+ transceivers in
the AT-SBx31CFC960 Controller Card.
After installing and cabling the transceivers, do one of the following:
 To install and cable additional transceivers, go to the appropriate
section in this chapter for instructions.
 After cabling all the ports in the chassis, go to Chapter 9,
“Powering On the Chassis” on page 173.