Defining mstp instance mappings – Allied Telesis AT-S95 WEB User Manual
Page 148
Page 148
Allied Telesis
AT-S95 Management Software Web Browser Interface User’s Guide
Defining MSTP Instance Mappings
Network administrators can assign MSTP mapping to a specific instance (port or trunk) using the MSTP Instance
Mapping Page.
To define MSTP interface mapping:
1.
Click Layer 2 > MSTP. The MSTP Page opens.
2.
Click Configure next to the Configure Instance Mapping option. The MSTP Instance Mapping Page opens:
Figure 98: MSTP Instance Mapping Page
The MSTP Instance Mapping Page contains the following fields:
•
VLAN — Displays the VLAN ID.
•
Instance ID — Defines the mapped MSTP instance. The possible field range is 1-7.
3.
Map the VLANs to Instance IDs.
4.
Click Apply to implement the mapping.
5.
Click Save Config on the menu, to save changes permanently.