Allied Telesis AT-S95 WEB User Manual
Page 86
Page 86
Allied Telesis
AT-S95 Management Software Web Browser Interface User’s Guide
Adding ACE Rules
1.
Click Network Security > IPv4 Based ACL. The IPv4 Based ACL Page opens.
2.
Click the Add ACE button. The Add IPv4 Based ACE Page opens.
Figure 49: Add IPv4 Based ACE Page
3.
Define the fields.
4.
Click Apply. The IPv4-based ACE rule is defined and the device is updated.
5.
Click Save Config on the menu to save the changes permanently.
To modify the IPv4-based ACL configuration:
1.
Click Network Security > IPv4 Based ACL. The IPv4 Based ACL Page opens.
2.
Click Modify. The IPv4 Based ACE Configuration Page opens:
3.
Define the fields.
4.
Click Apply. The IPv4-based ACL configuration is defined, and the device is updated.
5.
Click Save Config on the menu to save the changes permanently.