Allied Telesis AT-S95 WEB - Manual (Page 81)

Configuring Device Security
Defining Access Control
Page 81
To modify the MAC Based ACL configuration:
1. Click Network Security > MAC Based ACL. The MAC Based ACL Page opens.
2. Click Modify. The MAC Based ACE Configuration Page opens:
Figure 46: MAC Based ACE Configuration Page
3. Define the fields.
4. Click Apply. The MAC Based ACL configuration is defined, and the device is updated.
5. Click Save Config on the menu to save the changes permanently.
Defining IPv4 Based ACL
The IPv4 Based ACL Page contains information for defining IPv4-based ACLs, including defining the ACEs for
IPv4-based ACLs.
1. Click Network Security > IPv4 Based ACL. The IPv4 Based ACL Page opens.