Enabling snmp – Allied Telesis AT-S95 WEB User Manual
Page 162
Page 162
Allied Telesis
AT-S95 Management Software Web Browser Interface User’s Guide
Enabling SNMP
The SNMP Global Page provides fields for globally enabling and configuring SNMP on the device.
To enable SNMP:
1.
Click SNMP > Global. The SNMP Global Page opens:
Figure 109:SNMP Global Page
The SNMP Global Page contains the following fields:
•
Local Engine ID (9-64 Hex Characters) — Displays the engine number.
•
Use Default — Restores default SNMP settings, using the Local Engine ID.
•
Enable SNMP Notifications — Indicates if SNMP traps are enabled for the device. The possible values are:
–
Checked — Traps are enabled.
–
Unchecked — Traps are disabled.
•
Enable Authentication Notifications — Indicates if notification messages are issued if unauthorized
connection attempts occur. The possible values are:
–
Checked — Notifications are issued.
–
Unchecked — Notifications are not issued.
2.
Define the fields.
3.
Click Apply. The global SNMP settings are saved and the device is updated.