Allied Telesis AT-9448Ts/XP (Basic Layer 3) - Manual (Page 34)

Chapter 1: Overview
34
Compact Flash Card Slot
The compact flash card slot featured on many of the AT-9400 Switches
and shown in Figure 13 is used to store configuration files and AT-S63
Management Software image files on a compact flash card. A compact
flash memory card can make it easier for you to upgrade the files on a
switch or transfer files between AT-9400 Switches.
Figure 13 Compact Flash Card Slot
Note
A flash memory card is not required for normal operations of the
switch.
The AT-9400 Switches support only the AT-CF128A 128MB compact
flash card from Allied Telesis. Contact your Allied Telesis sales
representative for more information.
To insert a compact flash card, position it so that the manufacturer’s brand
label is facing up and press it into the slot until the button marked “Eject”
pops out.
To remove the compact flash card, press the button marked “Eject” until it
is pressed in completely and then remove the compact flash card.
For information on how to transfer files to and from a flash memory card,
refer to the AT-S63 Management Software User’s Guides.
463
AT-9408LC/S
COMPACT FLASH
EJECT
TER
P