Ac power connector – Allied Telesis AT-9448Ts/XP (Basic Layer 3) User Manual

Page 44

Text mode
Original mode

Advertising

Chapter 1: Overview

AC Power Connector

The AT-9400 Switches have a single AC power supply socket on the back
panel, which has autoswitch AC inputs. To power the switch on or off,
connect or disconnect the power cord.

Refer to “Technical Specifications” on page 77 for the input voltage range.

Advertising

This manual is related to the following products:

AT-9448T/SP (Basic Layer 3) AT-9424Ts/XP (Basic Layer 3) AT-9424Ts (Basic Layer 3) AT-9424T/POE (Basic Layer 3) AT-9424T (Basic Layer 3) AT-9424T/SP (Layer 2+) AT-9424T/GB (Layer 2+) AT-9408LC/SP (Layer 2+)