Allied Telesis AT-9448Ts/XP (Basic Layer 3) - Manual (Page 74)

Chapter 3: Troubleshooting
74
Cannot Establish a Local (Out-of-Band) Management Session
If you are unable to establish a local (out-of-band) management session
with the switch through the terminal port on the front panel, do the
following:
ˆ Check to be sure that the RJ-45 serial management cable is securely
connected to the serial terminal port on the switch and to the RS-232
port on the terminal or personal computer.
ˆ Check to be sure that the operating parameters on the terminal or the
terminal emulation program have been set correctly. The default
settings for the RJ-45 serial terminal port are located in “Starting a
Local Management Session” on page 64.