Allied Telesis AT-9448Ts/XP (Basic Layer 3) - Manual (Page 45)

45
Chapter 2
Installing the Switch
This chapter contains the installation procedures for the switch. The
chapter contains the following sections:
ˆ “Reviewing Safety Precautions” on page 46
ˆ “Selecting a Site” on page 49
ˆ “Twisted Pair and Fiber Optic Cable Specifications” on page 50
ˆ “Unpacking the Switch” on page 52
ˆ “Installing the Power Cord Retaining Clip (AC Switches Only)” on
page 53
ˆ “Installing the Switch in a Rack” on page 54
ˆ “Installing Optional Transceivers” on page 56
ˆ “Cabling the Twisted Pair or Fiber Optic Ports” on page 61
ˆ “Applying AC Power” on page 62
ˆ “Starting a Local Management Session” on page 64
ˆ “Warranty Registration” on page 66