Allied Telesis AT-9448Ts/XP (Basic Layer 3) - Manual (Page 57)

AT-9400 Series Gigabit Ethernet Switches Installation Guide
57
Figure 20. Installing a GBIC Transceiver
3. Repeat this procedure to install another GBIC transceiver or go to
“Cabling the Twisted Pair or Fiber Optic Ports” on page 61.
For GBIC optical and cabling specifications, consult the documentation
shipped with the module.
Installing an SFP
Transceiver
To install an SFP transceiver in the AT-9408LC/SP, AT-9424T/SP,
AT-9424T, AT-9424Ts, AT-9424Ts/XP or AT-9448T/SP Switch, perform
the following procedure:
1. Remove the dust plug from a transceiver slot on the switch, as shown
in Figure 21.
Figure 21. Removing a Dust Plug for an SFP Slot
2. Remove the transceiver from its shipping container and store the
packaging material in a safe location.
GBIC
23
GBIC
24
CLASS 1 LASER PRODUCT
23R
24R
1
3
5
7
2
4
6
8
L/A
D/C
D/C
L/A
D/C
L/A 1000 L
INK / ACT FDX
PO