Allied Telesis AT-S39 - Manual (Page 183)

AT-S39 Command Line Interface User’s Guide
183
Basic Switch Commands
DISABLE DHCPBOOTP
disable dhcpbootp
Deactivates the DHCP and BOOTP client software on the switch.
ENABLE DHCPBOOTP
enable dhcpbootp
Activates the DHCP and BOOTP client software on the switch.
PING
ping ipaddress
Instructs the switch to ping an end node.
PURGE IP
purge ip [ipaddress] [netmask] [route]
Returns a switch’s IP address, subnet mask, or default gateway address
to its default value.
RESET IP
reset ip interface=1
Returns a switch’s IP address, subnet mask, and gateway address to the
default values.
RESET SYSTEM
reset system [name] [contact] [location]
Deletes a switch’s name, the name of the network administrator
responsible for managing the unit, and the location of the unit.
RESTART REBOOT
restart reboot
Returns the switch’s operating parameters to the default settings.
RESTART SWITCH
restart switch
Resets the switch.