Allied Telesis AT-S39 - Manual (Page 188)

Chapter 21: Command Reference
188
SHOW HTTP SERVER
show http server
Displays the status of the HTTP server on the switch.
Port Parameter Commands
RESET SWITCH PORT
reset switch port=port
Resets a port.
SET SWITCH PORT
set switch port=port [status=forwarding|disabled]
[description=“description”]
[flowcontrol=none|transmit|receive|both]
[backpressure=enable|disable]
[mdimode=mdi|mdix|auto]
[renegotiation=auto]
[softreset=yes|no]
[speed=autonegotiate|10mhalf|10mfull|10mhauto|
10mfauto|100mhalf|100mfull|100mhauto|100mfauto|
1000mfull|1000mfauto|auto10m100m|auto1000m]
[priority=priority] [overridepriority=yes|no]
Sets a port’s operating parameters. (You can set only one parameter at a
time with this command.)
SHOW SWITCH PORT
show switch port=port
Displays a port’s operating parameters, such as speed and duplex mode.